AV Tuning & Development has specialized in building high-end horsepower engines since 2000.  All of our engines are meticulously assembled in-house and spec-built uniquely for each application.  While some shops send off engines to the “local machine shop” for assembly and machining,  AV Tuning & Development believes this is simply not good enough.  AV Tuning & Development has partnered with some of the most reputable companies such as ERL Performance, T1 Race Development, Darton, and Portflow who have made their names in our industry due to their top notch craftsmanship, quality, and endless efforts to repeatedly break record after record on the track.

From 200whp to 2000whp, AV Tuning & Development can provide a turn-key engine for any application where needed.  The following prices are for shortblocks only.  Longblock assembly is available but is not offered as a package price as each engine assembly is unique.  The following prices are for Honda, BRZ/FRS, and R35 GTR engines only.

Please contact us for any other build inquiries as we also support Mitsubishi, Toyota, Nissan, Subaru, Dodge, Cheverolet, and many other applications.

Honda ShortBlock Assemblies

Shortblock Stage 1

$ 2,049.99

Stock Sleeve Build

Does not apply for H series engines

  • CP Pistons 9.0:1 compression (Stock bore)
  • Eagle Rods
  • CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
  • ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
  • OEM Honda Gaskets
  • OEM Honda Oil Filter
  • Block bored and final hone
  • Block hot tanked 4x
  • Align Hone
  • Micro-Polished Crank (add $125)
  • Pressure tested and guaranteed against cracking through Darton International
  • Block resurfaced
  • BluePrints (add $95)
  • Fully assembled
Contact Us

Shortblock Stage 2

$ 2,999.99

Rated for 20psi on stock bore set-ups

(Roughly 300-400whp)

  • CP Pistons 9.0:1 compression (Stock bore)
  • Eagle Rods
  • CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
  • ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
  • OEM Honda Gaskets
  • OEM Honda Oil Filter
  • Darton 300 series flanged sleeves – Rated at 20psi
  • Block bored and final hone
  • Block hot tanked 4x
  • Align Hone
  • Polished Crank
  • Pressure tested and guaranteed against cracking through Darton International
  • Block resurfaced
  • BluePrints (add $75)
  • Balance Shaft Removal Kit (H Series Only. Add $75)
  • Fully assembled
Contact Us

Shortblock Stage 3Most Popular

$ 3,450.00

Rated for 500whp

  • ERL SuperDeck 1 Sleeves Pressure tested at 45psi (closed deck)
  • CP Pistons 9.0:1 compression (Stock bore, .20 over additional $80)
  • Eagle Rods
  • CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
  • ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
  • OEM Honda Gaskets
  • OEM Honda Oil Filter
  • Block bored and final hone
  • Block hot tanked 4x
  • Align Hone
  • Micro-Polished Crank (Add $125)
  • Block resurfaced
  • BluePrints (add $95)
  • Balance Shaft Removal Kit (H Series Only. Add $100)
  • Stress Relief
  • Fully assembled
Contact Us

Shortblock Stage 4

$ 3,899.99

  • ERL SuperDeck 1 Sleeves Pressure tested at 45psi (closed deck)
  • CP Pistons (Stock bore, .20 over additional, etc) (RingEnd Gap Set specific to power goals)
  • Choice of Rods: Carrillo Super A, Crower Billet (Add 100), Pauter, Carillo H beam (Add $400)
  • CP Piston rings, wrist pins, locks
  • ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
  • OEM Honda Gaskets
  • OEM Honda Oil Filter
  • Block bored and final hone
  • Block hot tanked 4x
  • Align Hone
  • Polished Crank
  • Block resurfaced
  • Balance Shaft Removal Kit (H Series Only. Add $100)
  • Stress Relief
  • BluePrints (add $95)
  • Fully assembled
Contact Us

FRS/BRZ FA20 Short Block Assemblies

Shortblock Stage 1Most Popular

$ 3,049

Stock Sleeve – Rated at 600whp

-Arias Heavy Duty Pistons with upgrade wrist pin and rings
-FBM Custom 1000hp Connecting Rods
-New OEM beaings (All Clearances measured and set to AV Specs)
-Fully Balanced
-Blueprinted
-Block bored and final honed
-Machined to AV Specs
-Clean and thoroughly inpsected

Contact Us

Shortblock Stage 2

$ 4,200

Rated for 700whp

-Iron Sleeved block
-Arias Heavy Duty Pistons with upgrade wrist pin and rings
-FBM Custom 1000hp Connecting Rods
-New OEM beaings (All Clearances measured and set to AV Specs)
-Fully Balanced
-Blueprinted
-Block bored and final honed
-Machined to AV Specs
-Clean and thoroughly inpsected
-Fully Assembled

Contact Us

Nissan R35 GTR Build Assemblies

AV GTR Stage 1Most Popular

$ -

Please call for pricing.600-800awhp

Stock Engine / Stock Transmission

3″ Downpipes

3″ Exhaust (Recommended for 600+whp)

ID Injectors

Cobb AP

Dual Intakes
Contact Us

AV GTR Stage 2

$ -

Please call for pricing1000awhp
Contact Us

AV GTR - Stage 3

$ -

inquire for pricing1400awhp
Contact Us

AV GTR -Stage 4

$ -

Inquire for pricing1600+awhp
Contact Us