JC’s Turbo 2.0 B16b Completed

Justin originally came to us with only wanting 350-400whp.  The plans changed and soon a simple build turned into a set-up that is capable of making 700whp.  A few things on this set-up include the Peak-Boost Top-Mount Turbo Kit, GT35R, Hondata s300 with boost control, AV Engineering Stage 4 block (2.0 stroker), AV Engineering Stage 1 Head, Injector Dynamics 1000cc, Walbro Fuel pump, Bosch 044 Inline Pump, Skunk2 Pro1 Cams, and countless other components.  Due to spiking issues we were forced to run a 3psi spring which is currently making 12psi and making 413whp/254tq.  Due to this mid-range power has suffered quite a bit.  Running the 7psi spring would have produced close to 500whp on pump gas around 18psi by 9500rpms.  We will be making the modifications necessary in order to stabilize boost pressure first before we tune the application to the 650-700whp and 9000-9500rpm goal that was set.

Run 001 – 3psi wastegate with 12psi max boost pressure (Boost Creep)

Run 008 – 7psi wastegate with 18psi max boost pressure (Boost Creep)