AV Engineering Shortblock Packages 
AV Engineering specializes in building high-end horsepower motors. Whether you are looking for 200whp to 800whp we can take care of all your horsepower needs. The following prices are for Honda Engines only. Please contact us for any of your Mitsubishi, Toyota, Nissan, or other Import inquiries at AVengineering@gmail.com.

AV Engineering Shortblock Stage 1 $2,049.99

Stock Sleeve Build - Does not apply for H series engines.

• CP Pistons 9.0:1 compression (Stock bore)
• Eagle Rods
• CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
• ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
• OEM Honda Gaskets
• OEM Honda Oil Filter
• Block bored and final hone
• Block hot tanked 4x
• Align Hone
• Polished Crank
• Pressure tested and guaranteed against cracking through Darton International
• Block resurfaced
• BluePrints
• Fully assembled

———————————————————————-

AV Engineering Shortblock Stage 2 $2,999.99

Rated for 20psi on stock bore set-ups (Roughly 300-400whp)

• CP Pistons 9.0:1 compression (Stock bore)
• Eagle Rods
• CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
• ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
• OEM Honda Gaskets
• OEM Honda Oil Filter
• Darton 300 series flanged sleeves - Rated at 20psi
• Block bored and final hone
• Block hot tanked 4x
• Align Hone
• Polished Crank
• Pressure tested and guaranteed against cracking through Darton International
• Block resurfaced
• BluePrints (add $75)
• Balance Shaft Removal Kit (H Series Only. Add $75)
• Fully assembled

———————————————————————-

AV Engineering Shortblock Stage 3 $3,350

Rated for 500whp

• ERL SuperDeck 1 Sleeves  Pressure tested at 45psi (closed deck)
• CP Pistons 9.0:1 compression (Stock bore, .20 over additional $80)
• Eagle Rods
• CP Piston rings, wrist pins, locks (RingEnd Gap Set specific to power goals)
• ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
• OEM Honda Gaskets
• OEM Honda Oil Filter
• Block bored and final hone
• Block hot tanked 4x
• Align Hone
• Polished Crank (Add $60)
• Block resurfaced
• BluePrints (add $75)
• Balance Shaft Removal Kit (H Series Only. Add $75)
• Fully assembled

* see below for example images

———————————————————————-

AV Engineering Shortblock Stage 4 $3,899.99

• ERL SuperDeck 1 Sleeves  Pressure tested at 45psi (closed deck)
• CP Pistons (Stock bore, .20 over additional, etc) (RingEnd Gap Set specific to power goals)
• Choice of Rods: Carrillo Super A, Crower Billet (Add 100), Pauter, Carillo H beam (Add $400)
• CP Piston rings, wrist pins, locks
• ACL Main/Rod Bearings and Thrust Washers (All Clearances Measured)
• OEM Honda Gaskets
• OEM Honda Oil Filter
• Block bored and final hone
• Block hot tanked 4x
• Align Hone
• Polished Crank
• Block resurfaced
• Balance Shaft Removal Kit (H Series Only. Add $75)
• Stress Relief
• BluePrints (add $75)
• Fully assembled

———————————————————————-

 

AV Engineering Shortblock Stage 3 Images: